Shure BETA 58A Guia do Utilizador descarregar pdf (Página 1)

Model BETA 58A

User Guide

27C2796 (Rev. 5)

Printed in U.S.A.

MODEL BETA 58A

SUPERCARDIOID DYNAMIC

VOCAL MICROPHONE

GENERAL

The Shure BETA 58A is a high-output, supercardioid dynamic vo-

cal microphone for professional sound reinforcement and project

studio recording. It maintains a true supercardioid pattern through-

out its frequency range. This ensures high gain before feedback,

maximum isolation from other sound sources, and minimum off-

axis tone coloration.

The BETA 58A has a shaped frequency response that is ideal for

close-up vocals. The superb performance of this microphone is not

affected by rough handling because of its rugged construction,

proven shock mount system, and hardened steel mesh grille. Typ-

ical applications for the BETA 58A include lead vocals, backup vo-

cals and speech.

FEATURES:

• Frequency response tailored for vocals, with brightened

midrange and bass rolloff to control proximity effect

• Uniform supercardioid pattern for high gain before

feedback and superior rejection of off-axis sound

• Neodymium magnet for high signal-to-noise output

• Hardened steel mesh grille that resists wear and abuse

• Advanced pneumatic shock mount system that minimizes

transmission of mechanical noise and vibration

• Minimally affected by varying load impedance

• Legendary Shure quality and reliability

APPLICATION AND PLACEMENT

The BETA 58A is designed for close-up vocals, and can be hand

held or mounted on a stand. Some of the most common applica-

tions and placement techniques are listed in the following table.

Keep in mind that microphone technique is largely a matter of per-

sonal taste; there is no one "correct" microphone position.

GENERAL RULES FOR MICROPHONE USE

• Aim the microphone toward the desired sound source and

away from unwanted sources. Since supercardioid

microphones such as the BETA 58A have narrow pickup

patterns and can pick up sounds from the rear, this may

not be obvious or intuitive.

• Place the microphone as close as practical to the desired

sound source. Refer to the table above.

• Work close to the microphone for extra bass response.

• Use only one microphone to pick up one sound source.

• Keep the distance between microphones at least three

times the distance from each source to its microphone.

• Use the fewest number of microphones as is practical.

• Place microphones as far as possible from reflective

surfaces.

• Add a windscreen when using the microphone outdoors.

• Avoid excessive handling to minimize pickup of

mechanical noise and vibration.

• Do not cover any part of the grille with your hand.

PROXIMITY EFFECT

Unidirectional microphones such as the BETA 58A progressively

boost bass frequencies by 6 to 10 dB at 100 Hz when the micro-

phone is at a distance of about 6 mm (1/4 in.) from the sound

source. This phenomenon, known as proximity effect, can be used

to create a warmer, more powerful sound. To prevent explosive low

frequency sound during close-up use, the BETA 58A bass re-

sponse gradually rolls off. This provides greater control and helps

the user take advantage of proximity effect.

SUGGESTED MICROPHONE

PLACEMENT

TONE QUALITY

Lips less than 15 cm (6 in.) away

or touching the windscreen, on

axis to microphone.

Robust sound, emphasized bass,

maximum isolation from other

sources.

15 to 60 cm (6 in. to 2 ft.) away

from mouth, just above nose

height.

Natural sound, reduced bass.

20 to 60 cm (8 in. to 2 ft.) away

from mouth, slightly off to one side.

Natural sound, reduced bass and

minimal "s" sounds.

90 cm to 1.8 m (3 to 6 ft.) away. Thinner, distant sound; noticeable

levels of ambient noise.

1 2 3 4 5 6 ... 11 12

Resumo do Conteúdo

Página 1 - User Guide

Página 2 - SPECIFICATIONS

10DATI TECNICITipoDinamico (bobina mobile)Risposta in frequenzaDa 50 a 16.000 HzNOTA: il grafico che segue mostra la risposta lungo l'asse ad una

Página 3 - DYNAMIQUE SUPERCARDIOÏDE

Página 4 - CARACTÉRISTIQUES

SHURE Incorporated http://www.shure.comUnited States, Canada, Latin America, Caribbean:5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.Phone: 847-6

Página 5 - MODELL BETA 58A

2STAGE MONITOR & P.A. LOUDSPEAKER PLACEMENTFor maximum rejection of unwanted sound, place the stage moni-tor(s) or P.A. system loudspeaker at a 60

Página 6 - SPEZIFIKATIONEN

3MODÈLE BETA 58A® MICROPHONE VOCAL DYNAMIQUE SUPERCARDIOÏDEGÉNÉRALITÉSLe Shure BETA 58A est un microphone vocal dynamique super-cardioïde conçu pour l

Página 7 - MICROFONO DINAMICO

4CARACTÉRISTIQUESTypeDynamique (bobine mobile)Courbe de réponse50 à 16 000 HzREMARQUE : la courbe ci-dessous montre la réponse en axe à unedistance de

Página 8 - ESPECIFICACIONES

5MODELL BETA 58A® DYNAMISCHES SUPERNIEREN-TAUCHSPULMIKROPHON FÜR SPRACHAUFNAHMENALLGEMEINESBeim Shure BETA 58A handelt es sich um ein dynamisches Supe

Página 9 - DINAMICO A SUPERCARDIOIDE

6AUFSTELLUNG DER BÜHNENLAUTSPRECHER UND LAUTSPRECHER FÜR BESCHALLUNGSANLAGENZur maximalen Unterdrückung unerwünschter Töne den bzw. die Bühnenlautspre

Página 10 - DATI TECNICI

7MODELO BETA 58A® MICROFONO DINAMICO SUPERCARDIOIDE PARA VOCALISTASGENERALIDADESEl Shure BETA 58A es un micrófono dinámico de supercardioide para voca

Página 11

8ESPECIFICACIONESTipoDinámico (bobina móvil)Respuesta de frecuencia50 a 16.000 Hz NOTA: La curva abajo ilustrada muestra la res-puesta de una fuente s

Página 12

9MODELLO BETA 58A® MICROFONO VOCALE DINAMICO A SUPERCARDIOIDEINTRODUZIONEIl modello BETA 58A della Shure è un microfono vocale dinamico a su-percardio